Glass wool Ursa PROFILO 35 50mm

Compare

Glass wool Ursa PROFILO 35 50mm

URSA PROFILO 35 is a glass wool insulation board. The product is vapour-permeable, compressed, non-laminated, hydrophobic fibre. It is best suited for non-utility attics, interior walls, suspended ceilings, joist ceilings, ventilated facades (second layer of insulation).

2-4 weeks

Thermal conductivity λD	0,035 W/mK
Density	– kg/m3
Fire classification	A1
Compressive stress at 10% deformation	*NPD
Tensile strength perpendicular to faces	*NPD
Point load	*NPD
Available thickness (mm)	50, 100, 120, 150, 200
Additional information	–

Loft Mineral wool for thermal insulation and insulation in usable and non-usable attics and lofts: above the rafters, between the rafters, under the rafters as well as suspended ceilings and knee walls (so-called dry construction).
Partition Walls Mineral wool for insulation and insulation of walls from the inside, construction of partition walls, pre-walls, partition walls and industrial pre-walls.
Frame constructions, ceilings, floors on joists Mineral wool for insulation and insulation of: floors on a grid, industrial ceilings, ventilated flat roofs, floors on joists on a wooden or steel structure, suspended ceilings, external and internal walls of frame houses and wooden houses.
Ventilated facades Mineral wool for thermal insulation and insulation of external walls using the light dry method with panel covering, external walls with a stone or glass facade, skeletal external and internal walls.
Three-layer walls Mineral wool for insulation and insulation of gaps between masonry and prefabricated walls in external and internal walls and basements.

Thickness [mm]	Lenght [mm]	Width [mm]	Pieces per pack [szt.] / [m2]	Packs per pallet [szt.] / [m2]	R [m2K/W]
50	1 250	600	1 / 15,00	20 / 300,00	1,40
100	1 250	600	1 / 7,50	20 / 150,00	2,80
120	1 250	600	1 / 6,00	20 / 120,00	3,40
150	1 250	600	1 / 4,50	20 / 90,00	4,25
200	1 250	600	1 / 3,00	20 / 60,00	5,70