Recommended

Mineral wool Knauf Omnifit Slab 35 50mm (1200x600)

kr 0.00

Required field!
Required field!
Required field!

Granular wool Paroc BLT 9, Bydgoszcz, Poland


Mr Marcin's company near Bydgoszcz was commissioned to insulate a large building. All nooks and crannies were filled with blown-in Paroc BLT granulated wool. The granulated wool is dry, does not shrink and does not settle.


Features:

The thermal conductivity coefficient lambda λD is 0.038-0,041 W/mK and the density of this wool is 40-70 kg/m³. Loose granular wool for use on the exterior and interior of buildings for thermal, acoustic and fire insulation.


Usage:

LOFT
Mineral wool for thermal insulation and insulation in usable and non-usable attics and lofts: above the rafters, between the rafters, under the rafters as well as suspended ceilings and knee walls (so-called dry construction).

PARTITION WALLS
Mineral wool for insulation and insulation of walls from the inside, construction of partition walls, pre-walls, partition walls and industrial pre-walls.

FRAME CONSTRUCTIONS, CEILINGS, FLOORS ON JOISTS
Mineral wool for insulation and insulation of: floors on a grid, industrial ceilings, ventilated flat roofs, floors on joists on a wooden or steel structure, suspended ceilings, external and internal walls of frame houses and wooden houses.

THREE-LAYER WALLS
Mineral wool for insulation and insulation of gaps between masonry and prefabricated walls in external and internal walls and basements.

Compare 0 / 3