Stone wool Rockwool HARDROCK MAX 150mm

Compare

Stone wool Rockwool HARDROCK MAX 150mm

Dual density stone wool boards with an additionally hardened top surface. Used for flat roofs. They are characterised by high load-bearing capacity - the stress at 10% deformation of the top layer of the dual-consistency board is no less than 70/90 kPa, and the resistance to point loads on the board at 5 mm deformation is as high as 800 N. Recommended for roofs with special requirements (e.g.: introduction of point loads directly on the thermal insulation).
The thermal conductivity coefficient is 0.040 W/m K. The product is priced individually.

2-4 weeks

Thermal conductivity λD	0,040 W/mK
Density	170/155 kg/m3
Fire classification	A1
Compressive stress at 10% deformation	70/90 kPa
Tensile strength perpendicular to faces	10 kPa
Point load	*NPD
Available thickness (mm)	50, 80, 100, 120, 130, 150
Additional information	two-density wool

Flat roof Mineral wool for insulation and acoustic insulation of flat roofs (unventilated flat roofs) of steel or concrete construction in a single or double layer system.

Thickness [mm]	Lenght [mm]	Width [mm]	Packs per pallet [pcs.] / [m2]	R [m2K/W]
50	2 020	1 220	24 / 59,145	1,25
80	2 020	1 220	15 / 36,966	2,00
100	2 020	1 220	12 / 29,572	2,50
120	2 020	1 220	10 / 24,644	3,00
130	2 020	1 220	9 / 22,179	3,25
150	2 020	1 220	8 / 19,715	3,75